Customers cover various industries around the world. In the past 10 years, there have been more than 15,580 customer cases.
Customers cover various industries around the world. In the past 10 years, there have been more than 15,580 customer cases.
Building Industry
Building materials are the general term for materials used in civil engineering and construction engineering. Building materials such as cement, flat glass, sanitary ceramics, stone, and wall materials need to go through countless processes from the initial processing of raw materials to the completion of post-production. For temperature, pressure The requirements are very high. Once there is a change, it is very easy to cause damage to a large number of building materials. Therefore, when choosing boiler equipment that can maintain stable temperature and pressure, the building materials industry must pay attention to the long-term stability and continuous output of the boiler.
The company that cooperates with Brit Boiler this time is a construction company in Mongolia. The company had a steam boiler that powered a mixing station for mixing construction materials. But with the company's rising development trend, this steam boiler can no longer fully meet the company's demand for power sources. Therefore, the construction company urgently needed to purchase new steam boilers to output more heat.
In the construction process of some underground pipelines, many hoses need to be transformed into hard pipes under certain high-temperature conditions to meet the requirements for pipelines in urban construction. Extend the service life of the pipeline and ensure the safety of urban construction. Maintaining this high-temperature condition requires the use of boiler equipment as a heat source.
Corner tube boilers use boiler coal injection technology. After the fuel is ejected in the hot air, it goes through multiple links such as ignition, combustion, coal ash separation, re-contact and combustion, etc. to generate flue gases that enter the boiler. The flue gases are exchanged with each other through water pipes and superheated pipes. After heat transfer, it turns into water vapor and enters the steam turbine to generate electricity. Because the corner tube boiler fully contacts the hot air and the combustion material, the heat energy is maximized, so it has the advantages of high thermal efficiency, energy saving, and environmental protection.
Learn more
The SZL series double-drum vertical chain grate water tube steam boiler adopts a quick installation or assembly structure. For 4-6t/h capacity, it is a quick installation water tube structure and is fully assembled in the factory before delivery. For 6-35t/h capacity, it consists of two major components: the upper part is the heating surface, and the lower part is the combustion equipment. The high-temperature flue gas is directed through the convection heating surface and passes through an economizer and dust collector before being discharged.
Learn more
The closed condensate recovery system is combined with the three-pass structure, economizer and air preheater to fully utilize the heat of the gas or oil, and the heat of the high-temperature condensate is recovered from the source, which can save operating costs and improve boiler operating efficiency.
Learn more
The skid-mounted gas boiler is an integrated boiler system that collects all auxiliary equipment such as the boiler body, control system, water softener, soft water tank, feed water pump, steam tank, fuel tank, instrument valves, etc. into one container to realize the entire boiler equipment mobility. The boiler only needs to be connected to the power supply to operate fully automatically. The instrumentation and control systems of the boiler are all completed in the container.
Learn more
The boiler adopts a double-drum longitudinal "D" type arrangement structure; water, steam or steam-water mixture flows in the pipe; flame burns and flue gas flows outside the pipe, forming extremely fast steam-water flow rate and excellent water circulation system. Boiler heat absorption rate and thermal efficiency are high.
Learn more
In the system of oil-fired and gas-fired boilers, the condensing heat exchanger is the corresponding waste heat recovery and utilization equipment installed at the end of the boiler. If the flue gas is around the heat transfer surface, the corresponding near-wall surface temperature will gradually drop to the dew point temperature, which is accompanied by the cooling and condensation process of the water vapor, thereby releasing the corresponding heat and conducting the heat to the interior through the heat transfer surface. The specific working fluid is used, and then the heat in the exhaust gas is collected again, so as to achieve the purpose of energy saving and environmental protection of the system.
Learn more
DZL type quick assembly boiler is a single drum longitudinal chain grate boiler. It is suitable for burning molded biomass fuel, and can also burn pure coal and molded biomass fuel. There is an economizer at the rear. The discharged ash and slag can be directly used as farmyard fertilizer, which is an efficient, energy-saving and environmentally friendly product. It is equipped with a drum induced draft fan for mechanical ventilation and a spiral slag discharging machine for mechanical slag discharging. The control and monitoring instruments are complete, making the boiler operation safe and reliable.
Learn more
This series of boilers is designed with a classic shell type, full-wet back, down-flow and three-pass design structure. The fuel is fully burned in the large-capacity combustion chamber, and the combustion heat load is low, which can greatly reduce the emission of harmful substances such as CO and NOx.
Learn more
Nathan King
Carton Packaging, Reverse Packaging & Materials Handling Sales
Call
Send email
Nathan King
Plate Freezer & ASRS Sales
Call
Send email
Nathan King
Carton Packaging, Reverse Packaging & Materials Handling Sales
Call
Send email
Copyright © Zhengzhou Dabonn Energy Co., Ltd
